Microprocessor step/profile temperature PID controller

PID temperature controller, for panel and machine/control board mounting, relay outputs, measuring range -100 °C ... +1750 °C, resolution / step 0.1ºC, 20 temperature stages / heating stages (made in Turkey, TENSE)

As can be seen from the above diagrams, the TENSE thermostat, unlike cheap analog thermostats, allows setting temperature and time thresholds required for the temperature to reach the set points. This greatly simplifies the programming process. Additionally, the PID mode allows you to keep the system temperature as close as possible to the set points.

An important difference from the competition is the simultaneous display of the current temperature, set point temperature, set step, and time. It is very convenient that the control buttons START/STOP/PAUSE/SET are on the front panel - this ensures quick and efficient control of your processes.

Temperature control is performed by switching on/off or PID regulation. The controller allows for self-optimization, preventing process values from being too high.

• Automatic PID parameter tuning

• Setting up to 20 temperature/heating stages

• Each stage is programmed for up to 18 hours of operation

• Sensor type: T/C (J,K,T,S,R), Pt100
• Selectable control type: P, PI, PD, PID or ON-OFF

• Automatic removal of 'excess' in PID mode

• Anti-winding

• Delay on for OUT in cooling mode

• Password protection

• EEPROM memory for storing settings

• Relay outputs OUT (NO+NC) 250 VAC, 2A

The measuring range depends on the sensor and can be set using the buttons on the temperature controller.

Don't forget to order our temperature sensors - type J thermocouple Fe-Const (metric 6/8) with a measuring range: -100 °C - +600 °C. Available with cable lengths of 1 m, 1.5 m, 2 m, 2.5 m, 3 m, 4 m, and 5 m.